Eton ego4000 Clock Radio User Manual


 
17
OPERATION GUIDE
MP3:
1. Press EQ/Prog button, the LCD shows “PROG”.
2. Press or button to select desired directory.
3. Press EQ/Prog button again to save the selection.
4. Press or button again to select desired track.
5. Press EQ/Prog button once more to save the selected track.
Repeat steps above to program other tracks. Up to 100 tracks can be
programmed.
T
o play the programmed sequence, press the button.
While playing, you can press or button to skip backward, and you
can also set repeatedly play for one or all the programmed tracks by pressing
Mode/Dir button.
After the last programmed track is played over, it stops automatically. To stop it
sooner, press the button.
To clear the programmed content, you may
1) Press the button twice while it is playing the programmed tracks. Or
2) Open to disc cover by pressing Open button.
TUNER DIRECTIONS
LISTENING TO THE RADIO
1. Press Tuner button to turn on the tuner.
Note:Whenever the tuner is turned on, it always begins at the last station
listened to.
2. Press Tuner button repeatedly to select desired FM band: FM1, FM2 or FM3.
3. Use one of these methods to tune for the desired station. The display shows
the tuned frequency.
Memory Tuning: Press one of the four memory buttons (Preset 1 through 4).
When one of the preset stations is selected, the LCD shows
“PRESET” and channel number.
Manual Tuning: Repeatedly press or button to tune for preferred
radio station. Press and hold down or button to
tune fast forward or backward.
Automatic Tuning: Press EQ/Prog or Mode/Dir button to search upward or
downward automatically. Once a radio station with strong
signal is received. It stops.
0 8
20 00 1 1
01 53
12 50
0 1
20 00 1 1
01 00
12 50
06
20 00 1 1
01 00
12 50
000
06
20 00 1 1
01 0 1
12 50
(For example, the 1st preset station FM 97.1 MHz
at FM1 is selected)