Filter
Top Products
OPERATION GUIDE
16
INTRO SCAN
Sequentially plays the first 10 seconds of each track enabling selection of the
desired track.
Please follow steps below to initiate Intro Scan:
1) Stop playing by pressing the ■ button (if necessary).
2) Repeatedly press Mode/Dir button until “INTRO”indicator appears in the
LCD display.
3) Press button. Intro playing starts at once from the first track on.
When the desired track is found, press button once more, intro play is
cancelled, and it plays the track normally.
RANDOM PLAY
You can have the player play at random by following steps below:
1) Stop playing by pressing the ■ button (if necessary).
2) Repeatedly press Mode/Dir button until “RANDOM” indicator appears on
the LCD display.
3) Press button. Random playing starts at once.
To cancel random play, press the ■ button.
PROGRAMMED PLAY
You can program up to 100 tracks in any order you choose to play, and the
same track can be programmed for more than once.
T
o Program CD or MP3 playing sequence, you must first stop playing by
pressing ■ button, then follow steps below to complete programming.
CD
1. Press EQ/Prog button, “PROG” indicator is shown on LCD display.
2. Press or button repeatedly to find out the track to be
programmed.
3. Press EQ/Prog button again to save.