Emerson MP205 MP3 Player User Manual


 
5
PREPARATION FOR USE
POWER SOURCES
This player is designed to operate on one alkaline “AAA” battery (not
included). Attempting to operate this unit on any other power source
may cause damage to the unit and such damage is not covered by
your warranty.
INSTALLING THE BATTERIES
The battery compartment is located on the back of the cabinet.
1.) Pull out the battery compartment latch and remove the battery
compartment cover.
2.)
Insert one fresh “AAA” alkaline battery in the battery compartment.
Be sure to follow the polarity marking in the
battery compartment. If the battery is inserted
incorrectly the unit will not work.
3.) Align the bottom battery compartment latch
and snap the top of the battery compartment
into place.
WHEN TO CHANGE THE BATTERY
When the battery is getting weak, the indicator
changes from “ ” (full battery) to “
(replace battery) in the display, meaning the
batteries are almost exhausted and should be
changed as soon as possible. Do not leave weak
or exhausted batteries in the player as they will
eventually leak and cause corrosion inside the
battery compartment.
"AAA"
BATTERY