Filter
Top Products
26
TROUBLESHOOTING
Player is not recognized on my Windows® 98SE computer: Install
the MP205 driver from www.emersonradio.com. Connect the player to
your computer and follow your operating system’s instructions to finish
installing the driver.
If player is still not recognized, locate the Universal Serial Bus (USB)
devices in your operating system’s device manager. If your MP205
displays a problem, follow your operating instruction’s directions
for updating the device driver and load the driver from the included
software CD.
After transferring files to the player, music did not play or data
was not present: Make sure music is in the MP3/WMA™ format.
Follow your operating system’s instructions for safely disconnecting
USB devices.
Buttons do not work/player does not power up: Make sure the
HOLD switch is in the ‘Off’ position. Make sure the battery is in the
correct position. Replace the battery with a new one if necessary.
No sound is heard through the headphones: Check the headphone
connection and adjust the volume level.