Filter
Top Products
7
Press the POWER button 1 to
turn the unit on. Press the
FUNCTION button 2 to select the
Radio mode.
2
1
1
Select the desired preset number
(up to 10 each band) by
repeatedly pressing the P.
MODE/MEM UP button.
2
4
Press the PROG/MEMORY
button again to set the preset.
Repeat steps 2 through 4 to set
more presets (up to 10 each
band).
2
5
For an enhanced Bass sound,
press the BBS button 1. Adjust
the VOLUME control 2 as
desired.
2
1
6
Press the PROG/MEMORY
button; “MEM” will blink in the
display and a preset number will
appear.
2
3
Press the BAND button 1 to
select AM or FM.
Use the SKIP/TUNING n2 or
SKIP/TUNING o3 button to
select the desired AM or FM
station.
3
2
1
2
TO SET/RECALL THE RADIO PRESETS (10AM/10FM)
NOTE: The radio memories will be kept for 10 seconds if the AC cord is unplugged and no batteries are
inserted.
AUTO PRESET Function
This model includes an Auto-Preset feature which you can use to automatically enter 10 strong FM and AM
stations in the tuner preset memory.
Note: This feature is useful if you live in a rural area with a limited number of stations. However if you live in
a major metropolitan area with many strong stations, do not use the Auto-Preset feature. It will memorize the
first 10 strong stations it encounters and these will probably not be the same 10 stations that you would
select if you were memorizing stations manually.
To use the Auto-Preset feature, turn the unit 'On', select the Tuner function and the desired band. Press and
hold the PROG/MEMORY button until the tuner display begins to move, then release the button. The tuner
will start searching up the band and it will automatically enter the first 10 strong stations on the selected
band in the 10 preset memories. The display will indicate which station is being entered in each of the 10
memories.
After the Auto-Preset feature memorizes 10 stations, the tuner returns to preset memory number 1.