Filter
Top Products
10
To repeat a single track, press the
P.MODE/MEM UP button
1 once;
“ ” will blink in the display.
Press the SKIP/TUNING n2 or
o3 button to select the specific
track that you wish to repeat.
When the desired track number
appears in the display, press the
PLAY/PAUSE ( ) button 4 to
begin playback. The specific track
you selected will be repeated
continuously.
3
2
1
4
1
To randomly play all of the tracks
on a disc continuously, press the
P.MODE/MEM UP button
1 three
times; “RND” will appear in the
display. Press the PLAY/PAUSE
( ) button
2 to begin playback.
1
2
3
To repeat all of the tracks on a
disc continuously, press the
P.MODE/MEM UP button
1
twice; “ ” will appear in the
display. Press the PLAY/PAUSE
( ) button 2 to begin playback.
1
2
2
TO REPEATEDLY PLAY BACK ONE TRACK/ALL TRACKS/RANDOM
Press the POWER button 1 to
turn the unit on. Press the
FUNCTION button 2 to select the
CD mode.
2
1
1
Press the PROG/MEMORY
button; “P01” (program number)
will briefly appear and then “00”
(track number) and “MEM” will
blink in the display.
2
3
Open the CD compartment lid by
pressing the OPEN/CLOSE area
and insert your disc in the CD
player. Close the CD compart-
ment door.
2
2
PROGRAMMED PLAYBACK
The CD player in this unit has a 20 track programmable memory that allows you to program up to 20 tracks
on any disc for playback in any desired order. You may program 20 different tracks or you may also program
certain tracks to play more than once.
NOTE: You cannot program a disc while it is playing. If the disc is playing, press the STOP (X) button first
and then follow the programming steps below.
To perform programmed playback, proceed as follows:
PROGRAMMED PLAYBACK SECTION CONTINUED ON NEXT PAGE.