Filter
Top Products
21
The “READ” indicator flashes as the player
reads the Table Of Contents on the disc.
After reading the disc the display will show
the total tracks and playing time of the disc.
Note: The reading time may take longer if you are using a CD-RW disc or
a disc encoded with MP3 audio files. This is normal and not an indication
of any problem with your unit.
6.) Press the PLAY/PAUSE button to begin playback.
Note: This CD player is equipped with an automatic 10-second Electronic
Skip Protection (ESP) memory system that will eliminate CD skipping if
the unit is accidentally shaken or bumped during playback.
The ESP system turns 'On' automatically when you press the PLAY/
PAUSE button and the ESP indicator begins flashing as the player stores
10 seconds of music in the memory. When the memory is full the ESP
indicator stops flashing and remains 'On'.
If the unit is shaken or bumped for a few seconds you will not experience
any skipping but the memory will be partially depleted and the ESP indicator
will begin flashing until the memory is full again. Since the ESP system
does draw additional power from the batteries you can shut the ESP system
'Off' if the unit is being used in a stable location and is not subject to shakes
or bumps.
You may turn the ESP function 'Off' or 'On' again by pressing the MODE/
FIND button on the remote control. There is no MODE/FIND button on the
main unit.
PD3689_062005.p65 20/6/2005, 16:1821