Filter
Top Products
23
TROUBLESHOOTING
Player is not recognized on my Windows® 98SE computer:
Install the MP200 driver from the website. Connect the player to your
computer and follow your operating system’s instructions to finish
installing the driver. For more info visit our website: www.emersonradio.
com .
If player is still not recognized, locate the Universal Serial Bus (USB)
devices in your operating system’s device manager. If your MP200
displays a problem, follow your operating instruction’s directions for
updating the device driver and load the driver from the website. For
more info visit our website: www.emersonradio.com .
After transferring files to the player, music did not play or data
was not present: Make sure music is in the MP3/WMA™ format.
Follow your operating system’s instructions for safely disconnecting
USB devices.
Buttons do not work/player does not power up: Make sure the
HOLD switch is in the off position. Make sure the battery is in the
correct position. Replace the battery with a new one if necessary.
No sound is heard through the headphones: Check the headphone
connection and adjust the volume level.