Filter
Top Products
16
Listening To The Radio
1.) Press the Power button on the main unit or remote control to turn the
system power ‘On’. The display lighting comes ‘On’.
2.) Press the Function button on the main unit or the remote control until the
RADIO indicator appears in the display.
The first time you select the RADIO
function the display will show:
“FM 87.5 MHz”.
To switch back and forth between FM and AM bands press the Band/iPod Play
button repeatedly.
The first time you select the AM band
the display will show “AM 520 KHz”.
3.) Use the ( ) or ( ) buttons select the desired station as follows:
• Automatic Tuning
Press and hold the ( ) or ( ) buttons until the display begins to move
and then release the buttons. The tuner will search for the first strong station
and stop on that station. Repeat this procedure until the tuner stops on your
desired station.
• Manual Tuning
Repeatedly press the ( ) or ( ) buttons to move the display forward
or back until it is showing the frequency of your desired station. Use the manual
tuning procedure to tune to stations that are not strong enough to be selected
by the Automatic Tuning method.
4.) If you have tuned to an FM Stereo
station the STEREO indicator will
appear in the display.
iP550_041907.p65 19/4/2007, 17:5616