Filter
Top Products
34
ALARM, SNOOZE, AND SLEEP TO MUSIC FUNCTIONS
Setting The Alarm Time and Alarm Mode
1.) If the system power is ‘On’, press the Power button to shut the power ‘Off’.
The power must be ‘Off’ to set/adjust the alarm time.
2.) With the correct time of day appearing on the display, press the Mode button
once. The display changes from current time to alarm time and the alarm time
flashes.
One of the alarm mode icons also appears in the display.
3.) While the alarm time display is flashing press the Tuning + ( ) / – ( ) buttons
on the top panel or TUN / buttons on the remote control to set the
Hour display forward or backward to the desired wake-up hour.
Example: AM 6:00.
Be sure to observe the PM indicator to confirm that you have set the hour
correctly. If no PM indicator appears the time display is AM.
4.) Press the Volume + or Volume – buttons to set the Minute
display forward or backward to the desired wake-up minute.
Example: AM 6:45.
5.) When the display is showing the desired wake-up time press
the Mode button once more and the Alarm Mode icon (BUZ,
RAD, iPod) will begin to flash.
6.) Press the Volume + or Volume – buttons to select the desired
wake up mode: BUZ (Buzzer), RAD (Radio), or iPod.
7.) After 10 seconds the alarm display will stop flashing
and the correct time display reappears.
iP500_030606r.p65 6/3/2006, 15:0934