Filter
Top Products
28
Removing or Changing The iPod
®
Adapter
If you will be using different ‘dockable’ iPod
®
models with this system you will
have to install the appropriate adapter in the docking area for each different
iPod
®
model. The procedure for removing and changing the iPod
®
adapter is
as follows:
1.) Remove your iPod
®
from the docking station as usual.
2.) Lift up on the docking cradle and remove it from the docking station as
shown.
3.) Press on the bottom of the iPod
®
adapter as shown to remove it from the
docking cradle.
4.) Re-install the docking cradle in the docking station.
5.) Insert the desired iPod
®
adapter in the docking cradle.
iPod
®
Adapter
Docking Cradle
(Bottom up)
iP500_030606r.p65 6/3/2006, 15:0928