Filter
Top Products
32
Listening To An External Audio Source
This system includes a 3.5mm mini stereo Auxiliary (AUX IN) Input jack on the
back panel so that you can easily connect any external audio source with a
headphone jack or a Line Out jack and listen to your external source through the
speakers of this system. Use the Auxiliary Input jack to connect older, non-dockable
iPod
®
s, or other MP3 players.
1.) Connect the headphone jack or Line Out jack of your external audio source to
the AUX IN In jack on the back panel of this system.
NOTE: The connection cable is not included.
2.) Turn on the power switch of your external source and operate it as usual.
Switch off any Equalizer or Bass Boost controls on the external source.
3.) Press the Power button of this system to turn the power ‘On’ then press the
Function button to select the AUX function.
The AUX indicator appears in the display.
4.) You should hear the sound from your external source through the speakers of
this system.
NOTE: If you connected the Line Out jack of your external source then you
only need to adjust the Volume control of this system. If you connected
the headphone jack of your external source then you may need to adjust
both the volume control of your external source and the Volume control of
this system to find the most desirable volume setting.
5.) When you are finished listening press the Power button of this system to
turn the power ‘Off’. Don't forget to switch off the power to your external source
as well.
NOTE: It is not necessary to disconnect your external source from the
AUX IN jack of this system.
iP500_030606r.p65 6/3/2006, 15:0932