Filter
Top Products
21
MP3 CD PROGRAMMED PLAYBACK
• When programming the tracks on an MP3 CD you must also select the Directory
Number of the tracks being programmed.
• You can program up to 20 tracks on an MP3 CD, same as for a normal CD.
• Programming can only be done while the player is in the STOP mode. If the
MP3 disc is playing, first press the STOP/CLEAR button and wait until the
display shows the total Directories, Tracks, and Playing Time on the disc, then
follow the programming steps below.
In this example the MP3 CD contains a total of
11 Directories and 172 Tracks.
Let’s assume that the first track we want to program is Track #3 in Directory #5.
1.) Press the PROGRAM button. The display shows
Directory “01” flashing, Track “000” and Program
Number “P – 01”.
2.) Press the SKIP FWD button repeatedly to select
Directory #05.
3.) Press the PROGRAM button to enter Directory #05
in Program Memory P – 01.
4.) Press the SKIP FWD button repeatedly to select
Track #3.
5.) Press the PROGRAM button to enter Track #3 in
Program Memory P – 01. The Program Number
display advances to “P – 02”, the Track Number
returns to “000”.
6.) Repeat Steps 2 through 5 to enter up to 20 tracks in the program memory.
After you have entered up to 20 tracks in the Program Memory press the PLAY/
PAUSE button to begin programmed playback.
MP3
STOP
John Denver
MP3
PROG
Lobo
MP3
PROG
Lobo
MP3
PROG
Ring
MP3
PROG
Ring
MP3
PROG
HD7288_ib070703.p65 7/7/2003, 10:5821