Emerson HD2800 Portable CD Player User Manual


 
5
POWER SOURCE
This CD player can be operated on either 120V 60Hz AC house current with the
AC adapter, included, or on 3V DC (2 "AA" batteries, not included).
AC OPERATION
Connect the AC adapter to your 120V AC outlet. Then connect the small plug to
the "DC IN 4.5V" jack on the side of the player as shown in the following illustration.
Do not use any AC adapter other than the one supplied with this unit.
If the AC adapter will not be used for an extended period of time, remove it from the
wall outlet by pulling on the adapter housing. Do not remove the adapter by pulling
on the cord. Do not touch the AC adapter with wet hands.
BATTERY OPERATION
1. Open the battery compartment door on the bottom
cabinet by sliding it in the direction of the arrow
and then lifting it open. To prevent loss, the door
cannot be removed from the unit.
2. Insert 2 "AA" batteries (not included) into the
compartment. Use alkaline batteries for longest life.
Follow the polarity markings inside the
compartment. If the batteries are inserted
incorrectly the unit will not work.
AC 120V 60Hz
Outlet
AC / DC Adapter
DC 4.5V
Input Jack
HD2800_ib.p65 2001/4/9, AM 10:485