Emerson CKD3630 Clock Radio User Manual


 
5
BATTERY BACK UP SYSTEM
This model includes a battery back up circuit that will maintain the clock and alarm
settings in the event of a temporary power interruption. The battery back up system
requires one 9-Volt battery, not included. The battery compartment is located on
the back of the cabinet.
1.) Press the battery door-locking tab in the direction of the arrow and remove the
battery door.
2.) Connect a fresh 9-Volt alkaline battery to the battery terminal in the battery
compartment. It can only be connected one way.
3.) Replace the battery door.
If the power is interrupted the display will go off and the radio will not work. However
the battery will maintain the clock and alarm settings in memory. When the power
is restored the display will come on again and the clock and alarm settings will be
correct.
The life of the back up battery will depend on the frequency and length of the
power interruptions that you experience. For best results we suggest you install a
fresh battery every 9 to 12 months. Always use a well-known brand of alkaline
battery.
CKD3630_060404.p65 4/6/2004, 15:195