Filter
Top Products
16
PROGRAMMED PLAYBACK
Use the Programmed Playback feature to play up to 20 tracks on a disc in any
desired order. You may also program a particular track to play several times within
a programmed sequence if desired.
Note: You cannot program a disc while it is playing. Press the STOP button
to stop playback and then follow the programming steps below.
1.) Load your disc as usual and wait until the display
shows the total number of tracks on the disc.
2.) Press the PROGRAM button on the front panel.
The PROG. indicator flashes and Track number
“0” begins flashing in the display.
3.) Press the SKIP FWD. or SKIP REV. buttons to select the first track
number to be programmed.
Example: Track number 7.
When the desired track number appears in the display press the PROGRAM
button again.
Track 7 is now entered in Program Memory
number “01”. The Track number display returns
to the flashing “0”.
4.) Repeat step 3, selecting a different track number
each time until you have entered up to 20 tracks
in the program memory.
To confirm the program after you have entered the last track press the
PROGRAM button repeatedly. The display will scroll through all the tracks you
programmed in sequence.
PROG.
CKD3630_060404.p65 4/6/2004, 15:1916