Emerson BAR201 Portable Radio User Manual


 
9
POWER SOURCES (CONTINUED)
AC OPERATION
To operate the unit using AC power, connect the small end of the AC power
cord to the AC power jack on the rear of the unit and insert the plug into an
AC outlet having 120V AC, 60Hz only. The batteries are automatically
disconnected when the AC power cord is connected.
NOTE: The AC plug supplied with the unit is
polarized to help minimize the possibility of
electric shock. If the AC plug does not fit into
a nonpolarized AC outlet, do not file or cut
the wide blade. It is the user’s responsibility
to have an electrician replace the obsolete
outlet.
CAUTION:
When not using AC power, disconnect the AC power cord from the wall
outlet and from the unit by pulling the plug (not the cord).
Do not touch the AC power cord with wet hands.
Fully insert the plug without exposing any part of the blade.