Elta 4250N Clock Radio User Manual


 
2. Then, install the unit by inserting into the bracket (until the hook clipped with the unit).
You can also choose to install the unit into lower position if needed.
3. To release the unit from the bracket, just simply press & pull the Hook-Release handle as shown & pull the unit with
reverse direction from the installation.
ATTENTIONS:
- Your unit must not be exposed to rain, direct sun-light or high temperature!
- Your unit may only be repaired by a qualified specialist
TECHNICAL DATA
Power source : Mains connection: 230V
~
50Hz
Back-up battery: 9-Volt-Batterie für die Uhrzeit
Radio frequency bandwidth : FM 87.5 - 108 MHz
VENTILATION WARNING!!
The normal ventilation of the product shall not be impeded for intended use.
DRIPPING WARNING!!
The product shall not be exposed to dripping or splashing. No objects filled with liquids, such as vases, shall be placed
on the product.
All subjected to change for improvement without any notice
10.
Hook
5 mm
30 mm
01-4250N-GE,GB 7/21/06 12:08 PM Page 10