Filter
Top Products
IB-PDV704-WU-E-123106
HELPLINE: 0845 300 7775
Remedy
TROUBLE SHOOTING
Symptom
Set needs to be reset.
Reset the DVD player by removing the battery pack and
disconnecting the AC adaptor for 1 minute. Replace the battery
pack and AC adaptor to resume normal use. (The player may
not be operating properly due to lightning, static electricity,
damaged or wrong discs, or some other external factors).
The player’s controls
don’t work or the player
cannot work properly.
General
1.The disc may be dirty, try cleaning the disc.
2.Make sure the disc is not upside down.
3.The region code is not 2, the disc cannot be used.
4.Disc may not be industry standard or it may be an illegal copy.
Only use legally sold movies not pirated copies.
A specific disc does not
play.
This is normal for high speed reading of DVD discs.Cabinet vibrates or hums.
Some discs may have sections which prohibit rapid advance (or rapid
reverse), especially on opening screens or during FBI warnings.
No rapid advance or
rapid reverse play.
1.Press AUDIO button several times. The disc may have been
set to DTS output or a blank audio channel on multiple language,
please select AC-3 output or reset to the main language (refer to
page 12).
2.Adjust the DVD player’s volume.
3.Make sure the AUDIO output connection and setting are correct.
See details on pages 18,19 and 23.
4.Ensure that the equipment is connected properly.
5.Ensure that the input setting for the TV and stereo system
are correct.
6.Adjust volume setting on your TV’s remote.
7.Make sure the headphones are detached from the DVD player.
8.The movie is paused, press play.
9.The movie is in search or fast play or other speed related play.
Audio is heard only during normal play.
No sound from your
TV or speakers.
The colour buttons
have no function or
have less function.
The disc you used is a copied one, please replace it with a fresh
original disc.
Cannot change a menu
item.
Try changing this item with the DVD door open (not during play).
No sound during fast
forward or other speed
functions.
This is normal. Normal sound only happens during normal play.
26
The remote control unit
does not work.
1.Check that the remote’s batteries are installed correctly.
2.The remote’s batteries are weak or depleted, replace them
with new ones (refer to page 9).
3.Use the remote control at a distance of less than 20 feet (6m)
from the DVD player.
4.Remove any obstacles between the remote control and remote
sensor, also make sure the lens on the remote control is not dirty.
IB-PDV704-WU-E-123106.pmd 2/15/2007, 11:26 AM27