Filter
Top Products
1. Connecting the Main Unit to the External Monitor
Note: Power off the XDVD270 main unit and any other A/V equipment before connecting
the XDVD270 external monitor or making any external Audio or Video connections.
Connect the gray end of the supplied communication cable to the right side of the main
unit. The main unit connector is labeled EXTERNAL MONITOR
.
Plug the black end of the communication cable into the left side of the external monitor.
The external monitor connector is labeled MAIN UNIT
.
Notes: The communication cable connectors include a locating tab allowing them to plug
into the main unit and external monitor one way only. Use caution when inserting the
connectors to prevent damage to the pins. Make sure the connectors are fully inserted,
but do not force the connectors into the main unit or external monitor.
2. Power Connections
Home Use
Connect the supplied AC power adapter to the
12VDC power connector located on the right
side of the main unit. Plug the other end into a standard 110VAC wall outlet.
Car Use
Connect the supplied DC power adapter to the
12VDC power connector located on the right
side of the main unit. Plug the other end into a standard vehicle cigarette outlet.
3. Headphone Connections
Connect the supplied headphones to the headphone outputs located on the right side of
the main unit or the external monitor.
Make sure the volume level is set to its minimum setting before connecting the
headphones.
XDVD270 OPERATION
Connections - Data Cable /Power
9