Filter
Top Products
XDVD270 OPERATION
General Operation - CD
In general, audio discs will play automatically when inserted
or the power is turned on.
Press STOP momentarily. The unit will return to the start-
up logo and display “Press Play Key To Continue”. If
PLAY
is pressed, the unit will resume operation from the last
position in memory.
Press STOP two times. The unit will return to the start-up
logo and display
. If PLAY is pressed, the unit will resume
operation from the beginning of the disc.
Press PAUSE to temporarily stop playback.
Press PLAY to resume playback.
Press I to skip to the beginning of the next track.
Press
I to return to the beginning of the previous track.
Press I or I from the main unit for more than 2
seconds to fast forward or fast reverse in 2x; 4x; 8x; 16x; 32x
modes. Press
PLAY to cancel fast forward or fast reverse.
Press REPEAT once to repeat the current track.
Press REPEAT twice to repeat the entire disc.
Press REPEAT again to cancel repeat function.
Press A-B once to set point “A”, again to set point “B”.
The points between “A” and “B” will continually repeat.
Press A-B again to cancel repeat A-B.
Press DISPLAY to select between the following:
Track --/-- with elapsed track time
Track --/-- with remaining track time
Track --/-- with elapsed total time
Track --/-- with remaining total time
Display Off
Some CD-Rs and CD-RWs may be incompatible with this
unit, depending on media type and recording method.
Play
Stop
Full Stop
Pause
Track Select
Fast Forward and Reverse
Track Repeat
Repeat A-B
Display Status
CD-R/RW Compatibility
18