D-Link DMP-110 MP3 Player User Manual


 
3
System Requirements
Your computer must meet the following requirements in order to use the
DMP-110:
Pentium 90MHz or faster
40MB hard disk space
16MB RAM or higher
Windows 98 or higher
CD-ROM drive
1 available USB port (USB Ver. 1.x)
Connecting to PC
To download MP3 files from PC to DMP-110, the DMP-110 must be
connected to the PC's USB port.
1.Turn on the DMP-110 and plug the provided USB cable into the data
port of the DMP-110.
2. Connect the USB cable provided to the USB port of your PC.
3. Power the DMP-110 off by disconnecting it from your PC.
Caution:
Always power on your DMP-110 before connecting the USB
cable.
Please do not remove the SmartMedia Card when the DMP-110
is running.
Do not remove the USB cable during download. If USB cable is
removed during download, MP3 files may be deleted or
corrupted.
MP3 Manager Installation and Use
The Installation CD includes:
MP3 Manager to download MP3 files from your PC to the
Player.
MusicMatch or Xing AudioCatalyst software to create and play
MP3 files on your PC.