Filter
Top Products
[Auto-on icon display is a musical note just left of and above the AM/PM indicator
of the home dock LCD display. Be sure icon is displayed. If the ALARM (bell) icon
is displayed pressing the DSP button will cycle through the modes, but check your
auto-on time after stepping through the modes to make sure the auto-on time did
not clear.]
Note: To set the time to auto turn on the home docking station is the same as
setting the alarm time above. (see step 2)
AUTO TURN OFF / SLEEP (Can only be set while the home dock is powered on)
Auto turn off (Sleep mode) can only be set when the docking station is powered on
and working (except alarming). Press and hold Push SLEEP (VOLUME) button until
15 MIN appears in the home dock screen. Pushing and releasing the VOLUME
button will step through 15, 30, 35, 60, 90, 120 Minutes and OFF
When SLEEP is activated the word SLEEP is displayed in the lower left corner of the
home dock LCD display.
2) Setting the alarm time
Press and hold DSP button on the docking station panel will enter the alarm time
setting mode. Like setting the clock, press SEL button to select hour or minute,
then rotating VOL UME knob to adjust the hour or minute’s value.
To console the alarm, just press and hold DSP button to open the alarm time, then
press and hold DSP again to console.
Note:
a. When alarming, press any button (except the VOLUME knob) to stop alarming.
b. When alarming, Press SNOOZE(VOLUME) button will stop alarming for two sec-
onds. After two seconds will alarm again.
3) Auto turn on/off the docking station
When the docking station is not on working, shortly press DSP button on the dock-
ing station panel to set the time of auto turning on the docking station. When the
docking station is on working (except alarming), press and hold Push SLEEP (VOL-
UME) button on the docking station panel to set the time of auto turning off the
docking station.
Note: To set the time of auto turning on/off the docking station is like to setting
the clock.
Other Operation
1) EQ
Shortly press EQ button on docking station panel to to turn on qualization function
30
© 2006 Directed Electronics—all rights reserved