Filter
Top Products
Installation 5
To help streamline the installation and ensure optimum
performance, please take the time to carefully read
through the instructions below. In doing so, you will gain a
better understanding of the products superior features
while ensuring they are operating to their full potential.
Step 1: Connect & Power the Unison i-XT
& Unison Dock
a) Find the ON/OFF power button on the back of the unit and
switch it to the ‘OFF’ position.
b) Locate the AC Power cable attached at the back of the
speaker.
c) Plug the AC Power cable into a mains AC outlet on your wall.
d) Turn the AC wall outlet switch on.
e) Find the 16.4' (5m) audio/power cable.
f) Plug the 3.5mm jack at one end of audio/power cable into the
‘AUX-IN’ port and the DC jack into the ‘DC OUT’ port, both
located on the back of the speaker.
g) Find the Unison iPod Dock.
h) Plug the 5' (1.5m) audio/power cables remaining 3.5mm and
DC jack into the ‘Line-out’ and ‘DC in’ ports on the back of the
Unison Dock.
i) Switch the ON/OFF power button on the back of the unit to
the ‘ON’ position.
NOTE:
* Use the AC outlet to power the speaker ONLY.
*The charge function of the speaker system may cause
occasional radio interference. It will return to normal
operation when the interference stops.