Filter
Top Products
9Troubleshooting
Troubleshooting
If you are experiencing problems with the speaker system,
please try the following:
a) Check the connection of the AC power cable to ensure that it
is securely plugged into the AC outlet on your wall and the AC
wall outlet is switched on.
b) Check the Blue LED status indicator to ensure the speaker
system is turned ON.
c) Ensure the speaker is connected via 3.5mm or RCA cable into
the line/aux in from the Unison Dock or device.
d) Ensure your iPod or device is playing and connected. Please
refer to respective user's guide for specific instructions
e) If using an iPod, press the Volume + /- on the speaker and
Unison Dock and also check the output volume of the iPod
and adjust them to the desired level.
f) If using another device press the Volume + /- on the speaker
and device to adjust the volume to a desired level.
g) Ensure the Unison Dock is within the maximum of 10 meters
of your remote. Check that there are no obstructions, such as
walls or electronic devices in between the line of the speaker
and where you are using the remote from.