Filter
Top Products
3.9 Select page groups as the page target (see Figure 2).
Figure 2. Linksys—Multicast Diagram
4.0 Setting up the Paging Server
To set up the paging server:
4.1 If you are connecting the CyberData Paging Server product to CyberData speakers so that you
can have more than one paging zone (Figure 3), complete step 1.1 through step 1.13.
4.2 Go to the web configuration page for the Paging Server and set it up as a SIP endpoint with the
following:
● Username (extension number)
● Password (make sure this matches what you have in step 2.2)
● SIP server address (step 1.5).Multicast address and port number combination
● DTMF two digit tone for each paging zone