Filter
Top Products
- 4 -
2. Install the MP3 Player
z Windows Me/2000/XP users need to install the MP3 player driver if they want to
upgrade the firmware.
z Windows 98 SE users need to install the MP3 Player on their system for
connection:
1.
Insert the CD attached in the package to the CD-ROM.
2.
Open the folder "Driver" bundled on the CD which contains the MP3 Player
installation program.
3.
Click on the Setup icon to begin the installation.
4.
Follow the Wizard to complete the installation.
3. MP3 Player Controls
A. Power On /Play / Pause / Enter button
B.
Power Off / Stop button
C.
Skip Previous / Fast Rewind button
D.
Skip Next / Fast forward button
E.
Reset Hole
F.
USB Port
G.
Microphone
H.
Menu button / A-B button
I.
Volume up button
J.
Volume down button
K.
Hold Switch
L.
Earphone jack
Note:
9 Please recharge the battery when the screen displays:
9 Please fully charge the battery every two or three months when the player is
not used for a long time. Otherwise, the battery voltage may be too low to
support the player’s power on. It takes about four hours for fully charge.
Note for Windows 2000 users:
9 Windows Service Pack 3 must be installed.