Filter
Top Products
Search Play (For MP3 only)
Specification
FREQUENCY : FM 87.5 -108.5 MHz
AM 525 - 1710 KHz
POWER SOURCE : AC120V~60HZ
ANTENNA : EXTERNAL 300 Ohm ANTENNA
FOR FM or AM
POWER CONSUMPTION : 110W
AUDIO POWER OUTPUT : 18W x 2
SPEAKER OUTPUT : 18W
SPEAKER SIZE : 6 1/2 x4 Ohm x 2
SPEAKER Ohm : 4
SPEAKER WATT : 40W
SPEAKER QUANTITY : 2
*DESIGN AND SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.
WARNING:
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE. DO NOT REMOVE COVER.
PILOT LAMPS SOLDERED IN PLACE. NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
Ventilation not being impeded.
Do not exposed to dripping or splashing and that no objects filled with
liquids, such as vases, shall be placed on the apparatus.
CAUTION: TO REDUCE
THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE
COVER (OR BACK). NO
USER - SERVICEABLE
PARTS INSIDE. REFER
SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The lighting flash with
arrowhead symbol, within
an equilateral triangle, is
intended to alert user to
the presence of uninsulated
"dangerous voltage" within
the product's enclosure
that may be of sufficient
magnitude to constitute
risk of electric shock
to persons.
The exclamation point
within an equilateral
triangle is intended to
alert user to the
presence of important
operating and
maintenance (servicing)
instruction in the
literature accompanying
the appliance.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
Programming Stations
9
CD Operation Radio Operation
Search by Track name:
1 Press FIND/ESP (5/37) once in stop mode,
on LCD display start to flash.
2 Use SKIP + (8/39) or SKIP- (10/40) to select the
letter (A-Z) that matches the first letter of the
track name you would like to find.
3 Hold the SKIP+ (8/39) or SKIP- (10/40) for 1-2
Seconds until the
on stop flashing .
4 Press SKIP+ (8/39) or SKIP- (10/40) to select
the track started with the selected letter(A-Z).
5 Press PLAY/PAUSE (7/42) to play the selected
track.
Search by Album name:
1 Press FIND/ESP(5/37) twice in stop mode until
ALBUM and
appear on the LCD display.
2 Press to select the Album.
3 Hold the SKIP+(8/39)or SKIP- (10/40) for 1-2
seconds to enter the selected Album , ALBUM
will disappear on the LCD display.
4 Press SKIP+(8/39)or SKIP- (10/40) to select the
track in the selected Album.
**IF there are files in the foot directory, display will
show Root . Hold SKIP+(8/39)or SKIP- (10/40)
for 1-2 seconds until ALBUM disappear on the
LCD display. Then search the files in the root
directory by pressing SKIP+(8/39)or SKIP-
(10/40)
1 Press FUNCTION (6/63) until TUNER appear
on the LCD display.
2 Press BAND (20) to select the desired waveband:
FM or AM.
3 Press and hold SKIP+ (8/39) or SKIP- (10/40)
until a radio station with sufficient signal strength
is found. Repeat this procedure until the desired
station is reached.
4 To tune into a weak station briefly press SKIP+
(8/39) or SKIP- (10/40) repeatedly until the
display shows the desired frequency or when
the best reception has been obtained.
Note:
1. For FM Tuning, ((ST)) will show on the
LCD display (25) when stereo sound obtained.
2. Maximum 10 radio stations for FM and 10 for
AM can be stored in the memory. When a preset
radio stations selected. The preset number
appears on the display.
1 Press FUNCTION(6/63) to TUNER mode.
2 Press AM/FM (36) to select the desired wave
band: FM or AM.
3 Press SKIP+(8/39) or SKIP-(10/40) to tune to
the desired frequency.
4 Press PROGRAM (15/43) , the PROGRAM
and 01 on LCD display will start flashing. The
current preset number will be displayed for
selection.
5 If you wish to store the radio station to another
preset number, press the PRESET-UP(18/38)
or PRESET-DOWN(16/41) to select the desired
preset number.
6 Press PROGRAM (15/43) on the unit again to
store the radio station. Repeat steps 3 to 6 to
store other preset radio stations.
7 Once all stations are programmed into memory,
use PRESET-UP (18/38) or PRESET-DOWN
(16/41) to select the programmed presets.
**During programing, if not button is pressed
within 5 seconds, the system will exit program
mode automatically.
Radio Operation