COBY electronic CS-MP125 Clock Radio User Manual


 
www.cobyusa.com Page 11
Power
This adapter should be used with 100-240V 50/60Hz AC wall outlets.
Plug the supplied AC adapter into an appropriate electrical wall outlet and
connect the other end to your device’s DC 12V Power In jack.
When power is connected for the rst time, the LCD Display should read
“12:00”.
Do not connect the AC adapter to a power outlet other than that
which is indicated here or on the label as this may result in the
risk of re or electric shock.
Do not handle the AC adapter with wet hands. Doing so may
cause electric shock.
Do not use an AC adapter other than the one included with the device.
Use of any other adapter may case a re or damage the device.
Battery Backup
The battery backup compartment is located on the bottom of the unit. Load
2 x “AA” batteries (not included) into the battery compartment.
When loading batteries, make sure that the positive (+) and negative (-)
ends are facing in the correct directions as indicated by the markings in
the battery compartment.
Do not mix used and new batteries (replace all batteries at the
same time). Do not mix alkaline batteries with any other type of
battery (carbon zinc, nickel cadmium, etc). Do not mix different
brands of batteries.
The battery backup function will maintain the time and display,
only. Other functions will not be available during power failure.
Connections