Filter
Top Products
English
280-8213-00
44 DXZ956MC
3. Touch on the left of the display to
select “CENTER-SP” or “SUB-WOOFER”.
RTN
SUB
ST
WOOFER
ADJ
SOUND
4. Touch on the right of the display to
select "ON", "ST", "MONO", or "OFF".
5. Press the [ADJ] button to return to the
original mode.
Setting internal amplifier use
ON/OFF (AMP CANCEL)
Set internal amplifier use ON/OFF matched to
whether or not an external amplifier is used.
Set AMP CANCEL to “ON” (internal amplifier
use OFF) when an external amplifier is
connected and the internal amplifier is not used.
• The factory default setting is “OFF” (internal
amplifier used).
1. Press the [ADJ] button to set to the adjust
mode.
2. Touch [SOUND].
3. Touch on the left of the display to
select “AMP CANCEL”.
RTN
AMP
OFFCANCEL
ADJ
SOUND
4. Touch on the right of the display to
select “ON” or “OFF”.
5. Press the [ADJ] button to return to the
original mode.
AUX function
This system has an external RCA input so you
can listen to sounds and music from external
devices connected to this unit.
Setting the input level (AUX
SENS) of portable audio (AUX
mode)
This function allows you to set the input level of
optional external devices connected to this unit.
• The factory default setting is “MID”.
1. Press the [ADJ] button to set to the adjust
mode.
2. Touch [SETTING].
3. Touch on the left of the display to
select "AUX SENS".
RTN
AUX
SENS
MID
ADJ
SETTING
4. Touch on the right of the display to
set the input level.
∗ Select LOW, MID or HIGH.
Notes:
• When the input level is overloaded, “OVERLOAD”
appears. Adjust AUX SENS or the input level so
that “OVERLOAD” disappears.
5. Press the [ADJ] button to return to the
original mode.
Performing a system check
(SYSTEM CHECK)
This function allows you to perform a system
check when an external equipment is connected
to this unit or the “SPEAKER SELECT” is
changed.
1. Press the [ADJ] button to set to the adjust
mode.
2. Touch [SETTING].
3. Touch on the left of the display to
select “SYSTEM CHECK”.
RTN
SYSTEM
CHECK
[
START
]
ADJ
SETTING
4. Touch [START].
The confirmation display appears.
5. Touch [OK].
ADJ SETTING
OK
CANCEL
Common Operations
+DXZ956MC_01-27-Eng.p65 1/27/05, 6:06 PM44