Clarion DXZ648RMP MP3 Player User Manual


 
20 DXZ648RMP
280-8003-00
English
File extensions
1. Always add a file extension “.MP3or “.WMA
to MP3 or WMA file by using single byte let-
ters. If you add a file extension other than
specified or forget to add the file extension ,
the file cannot be played.
2. Files without MP3/WMA data will not play.
The indication “––:––appears in the play
time display if you attempt to play files with-
out MP3/WMA data.
Logical format (File system)
1. When writing MP3/WMA file on a CD-R disc
or CD-RW disc, please select “ISO9660 level
1, 2 or JOLIET or Romeo” as the writing soft-
ware format. Normal play may not be possible
if the disc is recorded on another format.
2. The folder name and file name can be dis-
played as the title during MP3/WMA play but
the title must be within 128 single byte alpha-
betical letters and numerals (including an ex-
tension).
3. Do not affix a name to a file inside a folder
having the same name.
Folder structure
1. A disc with a folder having more than 8 hier-
archical levels will be impossible.
Number of files or folders
1. Up to 255 files can be recognized per folder.
Up to 500 files can be played.
2.
Tracks are played in the order that they were
recorded onto a disc. (Tracks might not always
be played in the order displayed on the PC.)
3.
Some noise may occur depending on the type
of encoder software used while recording.
Multisession function
When a disc contains both normal CD type tracks
and MP3/WMA type tracks mixedly, you can se-
lect which type of the recorded tracks to play.
Default value is “CD”.
Each time you press and hold the [BND] button
for 1 second or longer, the mixed mode is
switched between CD type or MP3/WMA type.
The following indication appears in the title dis-
play when switching the track type to be played.
Set to MP3/WMA
Disc
Mixed with CD and
MP3/WMA type tracks
CD type track only
MP3/WMA type track only
Set to CD
Play CD
Play MP3/WMA
Setting
Play CD Play CD
Play MP3/WMA
Play MP3/WMA
CD/MP3/WMA Operations
Display when MP3/WMA type track is se-
lected:
1. Types of recording that can be played are as
follows.
Display when CD type track is selected:
2. After making these settings, remove the disc
and then reinsert it.
3. When a mixed mode CD is loaded and CD is
set, the track to be played first is MP3/WMA
file data and no sound is heard.
Note:
When playing a CCCD (Copy Control CD), set the
setting to CD type. When this is set to MP3/WWA
type, the CD cannot be played normally in some
cases.
Backup Eject function
Just pressing the [Q] button ejects the disc
even if the power to the unit was not turned on.
1. Press the [OPEN] button to open the FLIP
DOWN PANEL.
Note:
If the FLIP DOWN PANEL will not open far
enough, open it gently with your hand.
2. Press the [Q] button. Remove the disc after
it is ejected.
3. Close the FLIP DOWN PANEL.
Notes:
Always close the FLIP DOWN PANEL once you
take out the disc.
If you force a CD into before auto reloading, this
can damage the CD.
If a CD (12 cm) is left in the ejected position for
15 seconds, the CD is automatically reloaded.
(Auto reload).
•8 cm CDs are not auto reloaded. Be sure to re-
move it when ejected.
+DXZ648RMP-009-ENG 11/12/03, 8:39 PM20