Filter
Top Products
DXZ538R 29
English
AF function
The AF function switches to a different fre-
quency on the same network in order to main-
tain optimum reception.
∗ The factory default setting is “ON”
∗ If the reception of the current broadcast station de-
teriorates, “SEARCH” appears in the display and
the radio searches for the same programme on
another frequency.
∗ For details on “AF function”, refer to the section
“RDS operation” of each owner’s manual.
●Switching OFF the AF function
●Switching ON the AF function
●AF function between RDS and DAB
When the same programme is broadcast by
both RDS and DAB, and this function is ON, the
main unit switches to receiving the broadcast
with the better reception automatically.
TA (Traffic Announcement)
In the TA standby mode, when a traffic announce-
ment broadcast starts, the traffic announcement
broadcast is received as top priority regardless of
the function mode. Traffic programme (TP) auto-
matic tuning is also possible.
∗ This function can only be used when “TP” is lit in
the display. When “TP” is lit, this means that the
DAB or RDS broadcast station being received has
traffic announcement programmes.
∗ For details on “TA”, refer to the section “RDS op-
eration” of each owner’s manual.
●Setting the TA standby mode
●Cancelling the TA standby mode
●Searching for a TP station
Notes:
• If a TP station is not received, the main unit stops
the search operation.
•“TP” may be lit in the display when a TP broad-
cast is transmitted from an RDS station. In this
case, press the [TA] button to perform TP seek
tuning. Press the [TA] button again to return to
the previous mode.
INFO (Announcement)
In the INFO standby mode, when the selected
announcement programme starts, the main unit
switches to the selected announcement
programme automatically.
Digital Radio / DAB Operations
1. Perform the following operation depending
on the connected model.
Press and hold the [T] button for 1 second
or longer.
2. Press the [a] or [d] button to select “INFO
SEL”, then press the [ ] button to enter
“INFO SEL” mode.
3. Press the [a] or [d] button to select an in-
formation item. You can select any of 6
items:
TRAVEL ➜ WARNING ➜ NEWS ➜
WEATHER ➜ EVENT ➜ SPECIAL ➜
TRAVEL ➜ ...
4. Perform the following operation depending
on the connected model.
Turn the [ROTARY] knob clockwise or
counterclock wise to set the information item
for ON or OFF.
5. Press the [T] button to return to the previous
display.
INFORMATION item
ENGLISH Contents
TRAVEL Transport flash
WARNING Warning / Service
NEWS News flash
WEATHER Area weather flash
EVENT Event announcement
SPECIAL Special event
●Setting the INFO standby mode
If you press and hold the [TA] button for 1 sec-
ond or longer, “INFO” lights in the display and
the main unit is set into the INFO standby mode
until the selected announcement is broadcast.
When the selected announcement broadcast
starts, the announcement item appears in the
display. If you press and hold the [TA] button for
1 second or longer while the selected an-
nouncement broadcast is being received, the
selected announcement broadcast reception is
cancelled and the main unit goes into the INFO
standby mode.
●Cancelling INFO standby mode
To cancel the INFO standby mode, press and
hold the [TA] button for 1 second or longer.
●Information select
This is a function for selecting INFORMATION
ON or OFF in the Information interrupt mode.
You can set ON up to 6 information items.
You can select any of the 6 items below: