Filter
Top Products
DXZ538R 23
English
Entering MESSAGE INFORMATION
Message up to 30 characters long can be stored
in memory and displayed for any mode.
∗ The factory default setting is “WELCOME TO
CLARION”.
1. Press and hold the [T] button for 1 second or
longer to switch to the adjustment selection
display.
2. Press the [a] or [d] button and select
“INPUT”.
3. Press the [ ] button.
4. Press the [a] or [d] button to move the
cursor.
5. Press the [D] button to select a character.
Each time you press the [D] button, the
character changes in the following orders:
Capital letters ➜ Numbers ➜ Symbols ➜
Umlaut ➜ Capital letters…
6. Turn the [ROTARY] knob to select the
desired character.
7. Repeat step 4 to 6 to enter up to 30
characters for message.
8. Press and hold the [ ] button for 2
seconds or longer to store the message in
memory and cancel input message.
9. Press the [T] button to return to the previous
mode.
Operations Common to Each Mode
Setting the button illumination
Press the [COLOR] button to select a color
type. Each time you press the [COLOR] button,
the type changes in the following order:
CLR SCAN ➜ RED ➜ MANDARIN ➜ OR-
ANGE ➜ AMBER ➜ YELLOW ➜ Y-GREEN ➜
LIME ➜ GREEN ➜ D-GREEN ➜ USER ➜ CLR
SCAN…
●Setting CLR SCAN mode
As selecting “CLR SCAN”, the color automati-
cally changes in the following order:
RED ➜ MANDARIN ➜ ORANGE ➜ AMBER ➜
YELLOW ➜ Y-GREEN ➜ LIME ➜ GREEN ➜
D-GREEN ➜ RED…
∗ The factory default setting is “CLR SCAN”.
∗ During change the color’s name is not appear.
∗ After 3 second the color changes to the other.
●Setting USER mode
The factory default setting is “R>8 G>3”.
As selecting “USER”, press and hold the
[COLOR] button 1 second or longer “R>8 G>3”
appears in the display.
1. Press the [a] or [d] button to move the
cursor.
2. Turn the [ROTARY] knob to select from 0 to
8.
3. Press and hold the [ ] button for 2
seconds or longer to store the color in
memory and cancel setting mode.