Filter
Top Products
26
English
DXZ368RMP
Operations Common to Each Mode
2-1. Select “MSG INP <E>”.
3-1. Press the
[
]
button.
3-2. Press and hold
[
BND
]
button for 1 second or
longer to clear the old message.
3-3. Press the
[
,
]
lever upward or down
-
ward to move the cursor.
3-4. Press the
[
BND
]
button to select a character.
Each time you press the
[
BND
]
button, the
character changes in the following orders:
Capital letters Numbers Symbols
Capital letters...
3-5. Turn the
[
ROTARY
]
knob to select the desired
character.
3-6. Repeat step 3-3 to 3-5 to enter up to 30
characters for message.
3-7. Press and hold the
[
]
button for 2 seconds
or longer to store the message in memory
and cancel input message mode.
• Dimmer control
You can setting the dimmer control “ON” or
“OFF”.
∗ The factory default setting is “ON”.
2-1. Select “DIMMER”.
3-1. Turn the
[
ROTARY
]
knob to select “ON” or
“OFF”.
• Setting the method for title scroll
Set how to scroll in CD-TEXT, MP3/WMA title.
∗ The factory default setting is “ON”.
2-1. Select “AUTO SCROL”.
3-1. Turn the
[
ROTARY
]
knob to select “ON” or
“OFF”.
To change other settings
1. Press the
[
ADJ
]
button to switch to the
adjustment selection display.
2. Press the
[ , ]
lever upward or downward
to select the “item name”.
Each time the
[ , ]
lever is pressed up/
down, the item display changes in the following
order:
“BLINK LED” “AMP CANCEL”
(
“LINK ACT”
)
“LANGUAGE” “TEL-
SP” “TEL-SWITCH” “SYS CHK
(
E
)
”
3. Turn the
[
ROTARY
]
knob to select the “desired
setting item”.
∗ After completing settings, press the
[
ADJ
]
but-
ton to return to the previous mode.
• Anti-theft indicator
The red Anti-theft indicator is a function for pre-
venting theft. When the DCP is removed from the
unit, this indicator blinks.
∗ The factory default setting is “OFF”.
2-1. Select “BLINK LED”.
3-1. Turn the
[
ROTARY
]
knob to select “ON” or
“OFF”.
• Setting the external amplifier
∗ The factory default setting is “OFF”.
2-1. Select “AMP CANCEL”.
3-1. Turn the
[
ROTARY
]
knob to select “ON” or
“OFF”.
• Setting the car speaker output for the
cellular phone
(
Optional BLT-433
)
∗ The factory default setting is “RIGHT”.
∗ To output the telephone calls, set the cellular phone
interrupt to ON.
2-1. Select “TEL-SP”.
3-1. Turn the
[
ROTARY
]
knob to select “RIGHT”
or “LEFT”.
• ON:
To scroll automatically.
• OFF:
To scroll just 1 time when the title was changed or the
[
T
]
button was pressed for 1 second or longer.
• ON:
Use with connected AMP.
• OFF:
Use with inside AMP.
• RIGHT:
Telephone calls can be heard on the front right
speaker connected to this unit.
• LEFT:
Telephone calls can be heard on the front left speaker
connected to this unit.
∗ Press and hold the
[
BND
]
button for 1 second
or longer to cancel the input message. Then
press and hold the [ ] button for 2 seconds
or longer to store the message and the mes
-
sage return to default setting.