Filter
Top Products
17
English
DXZ368RMP
RDS Operations
4. Press the
[
ADJ
]
button to return to the previous
mode.
∗ If the reception of the current broadcast station
deteriorates, “SEARCHING” appears in the
display and the radio searches for the same
programme on another frequency.
• AF function between RDS and DAB
When the same programme is broadcasted by
both RDS and DAB, and this function is ON, the
unit switches to receive the broadcast with the
better reception automatically.
∗ This function only operates when the DAH923 or
DAH913 DAB unit, sold separately, is connected.
∗ This factory default setting is “ON”.
1. Press the
[
ADJ
]
button to switch to the
adjustment selection display.
2. Press the
[
,
]
lever upward or downward
to select “LINK ACT”.
3. Turn the
[
ROTARY
]
knob to select “ON” or
“OFF”.
• ON:
AF switching between DAB and RDS enabled.
• OFF:
AF switching between DAB and RDS disabled.
4. Press the
[
ADJ
]
button to return to the previous
mode.
REG
(
Regional programme
)
function
When the REG function is ON, the optimum
regional station can be received. When this func-
tion is OFF, if the regional station area switches
as you drive, a regional station for that region is
received.
∗ The factory default setting is “OFF”.
Notes:
• This function is disabled when a national station
such as BBC R2 is being received.
• The REG function ON/OFF setting is valid when
the AF function is ON.
1. Press and hold the
[
ADJ
]
button for 1 second
or longer to switch to the RDS adjustment
selection display.
2. Press the
[
,
]
lever upward or downward
to select “REG”.
3. Turn the
[
ROTARY
]
knob to select “ON” or
“OFF”.
• ON:
“REG” in the display lights and REG function turns
on.
• OFF:
“REG” in the display goes off and REG function
turns off.
4. Press the
[
ADJ
]
button to return to the previous
mode.
Manually tuning a regional station in
the same network
1. This function is valid when the AF function is
ON and the REG function is OFF.
Note:
• This function can be used when a regional broad
-
cast of the same network is received.
2. Press any one of the
[
DIRECT
]
buttons to call
out the regional station.
3. If the reception condition of the called out sta
-
tion is bad, press the
[
DIRECT
]
button of the
same number. The unit receives a local station
on the same network.
TA
(
Traffic Announcement
)
In the TA standby mode, when a traffic announce-
ment broadcast starts, the traffic announcement
broadcast is received as top priority regardless
of the function mode so you can listen to it.
Traffic programme
(
TP
)
automatic tuning is also
possible.
∗ This function can only be used when “TP” is lit in
the display. When “
TP” is lit, this means that the
RDS broadcast station being received has traffic
announcement programmes.
• Setting the TA standby mode
If you press the
[
TA
]
button when only “
TP” is lit
in the display, “TP” and “TA” light in the display
and the unit is set into the TA standby mode until a
traffic announcement is broadcast. When a traffic
announcement broadcast starts, “TRA INFO”
appears in the display. If you press the
[
TA
]
button
while a traffic announcement broadcast is being
received, the traffic announcement broadcast
reception is cancelled and the unit goes into the
TA standby mode.