Filter
Top Products
English
21 CZ209
If an error occurs, one of the following messages is displayed.
Take the measures described below to eliminate the problem.
USB/iPod
No sound The device contains no MP3/
WMA files.
Record MP3/WMA files properly to the device.
The files are not proper MP3/
WMA format.
Use properly encoded MP3/WMA files.
Files are DRM copyright
protected.
See page 11 for details on how to cancel DRM
protection.
Connectors are loose. Disconnect the device and reconnect securely.
Some USB portable music
players may consume current
that exceeds the USB rating.
In this case, this unit’s
overcurrent protection circuit
operates to stop the music
playback.
Check operation of portable music player.
Sound is
interrupted or has
noise.
MP3/WMA files are not
encoded properly.
Use properly encoded MP3/WMA files.
Device isn’t
recognized.
Device is damaged. Disconnect and reconnect the device. If device still
cannot be recognized, try replacing with different
device.
Connectors are loose.
According to the device’s
operation state, device may
not be recognized.
Disconnect and reconnect the device.
Cannot connect
device to the USB
cable.
Device has been connected
improperly.
Connect the device in reverse direction.
Connector is broken. Replace with a new device.
Problem Cause Measure
9. ERROR DISPLAYS
Error Display Cause Measure
CD/MP3/WMA
ERROR 2 A CD is caught inside the CD
deck and is not ejected.
This is a failure of the CD deck mechanism. Consult
your dealer.
ERROR 3 A CD cannot be played due
to scratches, etc.
Replace with a non-scratched, non-warped disc.
ERROR 6 A CD is loaded upside-down
inside the CD deck and does
not play.
Eject the disc and reload properly.