Filter
Top Products
RL
BASS
LEVEL
AUDIO
INPUT
POWER
ON/OFF
SPEAKERS
CAMBRIDGE SOUNDWORKS
NEWTON, MASSACHUSETTS
12V DC IN
3
Satellite Cube Connections
Connect the speaker wire from one
satellite to the right speaker
output (+ R –) of the subwoofer.
Connect the conductor with the
red band to the red (+) terminal.
Connect the other conductor to the
black (–) terminal.
Connect the speaker wire from
the other satellite to the left
speaker output (– L +) of the
subwoofer.
Connecting the two cubes identi-
cally assures that they operate “in
phase” (their cones move in and
Speaker wire
out together). “Out of phase” con-
nections can muddy the stereo
effect. Solo voices, which should
appear to come from a point be-
tween the two cubes, will sound
“split” between them.
Notes
The satellite amplifiers inside the
PCWorks
subwoofer are
specifically designed to drive the
PCWorks
cube satellites.
Do not connect these left and right amplifier outputs to any
other speakers or any kind of signal processing device.
You can splice more standard speaker wire or regular
18-gauge lamp cord onto the 12-ft. speaker wires supplied
using wire nuts; visit your store or call Cambridge Sound-
Works at 1-800-FOR-HIFI to purchase additional wire.
Right
Satellite
Cube
Left
Satellite
Cube
Subwoofer Control Panel
Red band
Use of the Bass Level control is described in each of
the applications sections that follow; for now simply
set it at the midway (12 O’Clock) position.
To connect speaker wires to
subwoofer, push on the
spring-loaded tab above
each connector, insert bared
end of wire, then release tab
to lock wire in place.
Red band