Filter
Top Products
9
PROGRAM PLAY OF MP3 DISC
Up to 64 tracks on a disc can be programmed for play in any desired sequence.
- First, select the CD mode and load a disc that you want to program.
- The track must be programmed in the STOP mode.
- The same track can be programmed more than once.
1. In Stop mode, press the PROGRAM (17) on the unit ”00“ ”PROGRAM“ AND ”000P--01” will be shown on
the display, and ”00“ will start flashing.
2. Select a desired Album which will be shown on the display by pressing (20) or (21).
3. Press the PROGRAM (17) to store the selected track. ”0X” will be shown on the display and the ”000“ will
start flashing. (where ”X“ indicates the selected album).
4. Select a desired Album which will be shown on the display by pressing the (20) or (21) button
or using the numeric keys on the remote control to program.
5. Press the PROGRAM (17) to store the selected track ”00“, ”PROGRAM“ AND 000 P -- 02“ will be shown on
the display.
6. Repeat steps 2-5 to select and store other desired tracks.
7. Press the PLAY/PAUSE (19) to start programmed playing from the PROGRAM 01 track.
The Album and track number of the first programmed track, PROGRAM and the elapsed playing time will
be shown on the display.
8. To end the programmed play, press STOP button (23).
Note: The program numbers will be lost if the power is turned off (ON/STANDBY switch is NOT green).
RANDOM
You can play all the tracks in random mode.
1. During playing, pause or stop mode, press RANDOM (24) on the remote control to enable random play
mode. “RANDOM” will appear on the display.
2. To exit RANDOM mode, press RANDOM (24) again, “RANDOM” will disappear from the display.
ESP MODE
Shockproof function ‘ESP’ can be set in CD mode.
Press FIND TITLE/ESP (25) to cancel the ESP function in CD mode and the “ESP” display will disappear.
Press the button again. The “ESP” will be shown on the LCD display and the ESP time “10 sec” will be dis-
played on the LCD.
PROGRAM
000 P -- 01
MEMORY