Filter
Top Products
13
BT Freeway Mini – Edition 2 – 18.05.04 – 5916
Using your mobile radios
2. When scan is switched on your radio will rapidly scan
each of the 8 channels and pause for 5 seconds on any
active channel so you can hear the transmission, before
resuming the scan.
If an active channel is found and you hear the transmission:
To respond to the other radio, press within 5 seconds.
To exit the transmission, and continue with the channel
scan press or .
Channel monitor
When you are not receiving a call your handset
automatically mutes the speaker so that you will not
hear weak signals or background noise. By switching
channel monitor ON you can hear transmissions on your
selected channel that you would not hear under normal
circumstances as the signal is too weak.
1. Press three times. The channel monitor is switched
ON for 5 seconds. During this time you will hear
background noise along with any weak transmissions.
Menu
PTT
When channel monitor is on you
will hear a lot of background noise
along with any weak transmissions.
5916 BT Freeway Mini UG 19/5/04 9:54 am Page 13