Bose LT9402TM Portable Speaker User Manual


 
10
Hanging Panaray
®
LT Series III Loudspeakers
English
Preparing Your Panaray
®
LT Loudspeaker For Hanging
WARNING: Read and follow all safety guidelines on page 2 prior to installation of your Panaray LT
loudspeaker. If you have not read page 2 completely, please do so now.
The LT3202
®
III, 4402
®
III, 9402
III, 9702
®
III, 6400, 9400, 6403, 9403, MB12 and MB24 loudspeakers have a total
of 16 inserts located on each cabinet (see pages 25-27, and 29-31 for insert locations). Use only these 16 inserts
for mounting or suspending the loudspeakers.
WARNING: Do not attach, mount, or rig hardware to a location other than the 16 inserts; doing so may cause the
loudspeaker to hang unsafely. Do not hang the loudspeakers from the handles.
To install the Panaray LT loudspeaker, first remove the placeholder bolts at the top of the speaker cabinet using a 7/32" hex
drive wrench. Next, insert the 4 shoulder eye bolts with a thread-locking compound. Tighten to 20-25 pounds/inch
(2.26-2.82 Newton-meters).
Sådan forbereder du Panaray LT-højttaleren til ophængning
ADVARSEL! Ls og f¿lg alle sikkerhedsforskrifter p side 3, inden du installerer Panaray LT-h¿jttaleren. L s
side 3 nu, hvis du ikke allerede har gjort det.
LT3202
®
III, 4402
®
III, 9402
III, 9702
®
III, 6400, 9400, 6403, 9403, MB12 og MB24-højttalerne har 16 huller
i hvert kabinet (se side 25-27, 29-31 for placeringen af hullerne). Brug kun disse 16 huller til at montere eller
hænge højttalerne.
ADVARSEL! Du skal ikke fastg¿re eller montere hardware til et andet sted end de 16 huller, da dette kan medf¿re
at h¿jttaleren h nger usikkert. H ng ikke h¿jttalerne i h ndtagene.
Når du skal installere Panaray LT-højttaleren, skal du først fjerne boltene i toppen af højttalerkabinettet med en
7
/
32
" seks-
kantnøgle. Dernæst skal du indsætte de fire ansatsøjebolte med et gevindlåsende materiale. Stram til 2,26-2,82 Nm.
B. Insert 4 shoulder eye bolts
B. Indsæt fire ansatsøjebolte
B. Fügen Sie die 4 Ring-
schrauben (nach DIN 580) ein
B. Inserte los cuatro tornillos de
argolla
B. Insérez 4 boulons à œil à
embase
B. Inserire 4 bulloni ad occhio
con collare
B. Breng de 4 borstoogbouten
aan
B. Sätt i fyra skruvöglor
A. Remove placeholder bolts
A. Fjern bolte
A. Entfernen Sie die Platzhal-
terschrauben
A. Retire los tornillos de
fijación
A. Retirez les capuchons
A. Rimuovere i bulloni segna-
posto
A. Verwijder de bouten die als
plaatshouder dienen
A. Ta bort skruvarna