Filter
Top Products
8
SOUNDDOCK
®
10 DIGITAL MUSIC SYSTEM
EnglishTAB 6, 14TAB 8, 16 TAB 7, 15 TAB 3, 11TAB 5, 13 TAB 2, 10TAB 4, 12
Problem What to do
I do not hear any sound
from the SoundDock 10
system.
• Make sure the power cord is properly connected on the back of the SoundDock 10 system and that
the system is plugged into a live AC outlet.
• Press the source button (dock or AUX) on the remote for the source you are using.
• Press the Play/Pause button on the remote control.
• Increase the system volume.
• If listening to a device connected to AUX IN, increase the volume on the device.
• Remove your iPod/iPhone from the dock, wait 5 seconds, then reseat it.
• Unplug the power cable for 1 minute, then plug it back in to reset the system.
My iPod/iPhone is not
charging.
• Make sure the power cord is properly connected on the back of the unit.
• Make sure the system is plugged into a live AC outlet.
I cannot navigate the
playlists on my iPod/
iPhone.
• Make sure that you have created playlists on your iPod/iPhone.
My iPod/iPhone does not
respond to the remote
control.
• Make sure there is a clear path between the remote and the system.
• Using a clean, dry cloth, wipe the small lens on the front end of the remote.
• Try the remote from a different location. You may be experiencing interference from bright room
lights or sunlight.
• Remove your iPod/iPhone from the dock, wait 5 seconds, then reseat it.
• Make sure the remote battery is installed correctly or replace it if it is old (refer to page 6).
My system does not
respond to any controls.
• Unplug the power cable for 1 minute, then plug it back in to reset the system.
•Contact Bose
®
Customer Service.
Big_Max_OG.book Page 8 Thursday, April 16, 2009 1:22 PM