Filter
Top Products
7
SOUNDDOCK
®
10 DIGITAL MUSIC SYSTEM
TAB 5, 13TAB 4, 12 TAB 6, 14 TAB 8, 16TAB 7, 15English TAB 3, 11TAB 2, 10
2. Remove the used battery and insert the new one
(CR2032 or DL2032). Refer to page ii for battery infor-
mation and safety instructions. Be sure the battery is
flat side up, with the positive (+) symbol in view.
3. Reseat the cover and turn it clockwise until it locks
into place.
iPod/iPhone compatibility
If you have questions regarding the compatibility of your
iPod/iPhone with the SoundDock 10 digital music
system, see www.Bose.com for the most current
compatibility information.
UPDATE connector
The UPDATE connector on the back of your SoundDock
10 system is for potential software updates, only.
Troubleshooting
The following troubleshooting table should help solve
operating problems with your SoundDock 10 system.
However, before using the table, do the following:
• Remove your iPod/iPhone from the dock and check
for obstructions on the dock connector and on your
iPod/iPhone. Then firmly reseat it in the dock.
• Make sure you have the latest software on your iPod/
iPhone.
UPDATE
Big_Max_OG.book Page 7 Thursday, April 16, 2009 1:22 PM