Filter
Top Products
31
Deleting File
(DELETE)
30
1.
If you want to delete a file stored in
the product, press the '
❿❿
' button
in the menu mode to move to
'DELETE' mode and press the
‘MENU’ button.
2.
In this status, press the '
❿❿
' button
to select a music or voice file and
press the 'MENU' button.
3.
Now, ‘YES NO EXIT’ is displayed in LCD with the file you want to
delete. Using the '
❿❿
' or '
➛➛
' button, select 'YES' if you want to delete
the file or select 'NO' if you don’t. If you want to change the mode,
select 'EXIT' and press the 'MENU' button.
1.
This function is used to keep other functions from working while the
product is running.
2.
Push the 'HOLD' switch at the bottom of the product to the arrow
direction and the other key function will not work.
3.
At this state, the 'Lock Mark will be displayed at LCD panel. To escape,
return the HOLD switch to the other side.
Hold Function
(HOLD)
Troubleshooting Tips
●
Please check the followings first if the product does not work properly.
●
The buttons of the
product do not work.
●
The music file is not
played.
●
Power is not on.
●
It stops in an initial state.
●
Used space is displayed
while there is no file
stored.
●
Other errors of the
product.
●
Check if the 'HOLD' switch on the lower end of the product
is locked.
●
Turn the 'HOLD' switch to the original direction.
●
Check if the extension is 'MP3' or 'WMA'.
●
This product can play only the 'MP3' and 'WMA' files.
●
Check the polarity of the battery.
●
Check the remained capacity of the battery.
●
Remove the battery from the product, connect the product
to a PC using a USB cable and power it on. When you
power the product on, ‘READY’ sign will appear on the LCD.
●
In this status, refer to the Formatting Procedure of this
manual.
●
If it stops in an initial state and the problem is not solved by
formatting, please start 'Live Music_H Update'.
●
Check 'Control Board ➞ System (System Registration
Information) ➞ Device Controller and see if there is ‘USB
Controller (General Series Bus Controller, Universal Series Bus
Controller).
●
If you do not have the above devices in your PC, you cannot use
a USB port. In this case, you have to so set the bios (CMOS)
environment that you can use a USB port.
●
Contact the sales agent for a detailed setting method.
●
Although the product is
connected to a PC, the
removable disk is not
generated.
●
If there isn’t any new
hardware detected
●
Remove the battery from the product and reinsert it.
●
If it is not caught normally as below, click the right button of the
mouse to delete it.
●
After deletion, click 'hardware change search' icon in the upper
end to newly install the device.
●
When it is normally installed, the yellow exclamation mark in the
front will disappear.
Problems
Solution