Filter
Top Products
37
DANSK
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
➮ Press the button 2.
The control panel latch mechanism
opens.
➮ First, pull the control panel straight
off the unit and then out towards
the left.
● The unit switches off after the con-
trol panel is removed.
● All the current settings are saved.
● Any cassette already inserted in
the unit remains there.
Attaching the control panel
➮ Slide the control panel from left to
right into the unit’s guide.
➮ Press the left-hand edge of the
control panel into the unit until it
clicks into place.
Note:
● When attaching the control panel,
make sure you do not press the
display.
If the unit was still switched on when
you removed the control panel, the unit
will automatically switch on with the last
settings activated (i.e. radio, cassette,
CD changer/Compact Drive MP3 or
AUX) when the panel is replaced.
THEFT PROTECTION
Switching on/off
There are various ways of switching the
unit on/off.
Switching on/off using button
1
➮ To switch the unit on, press button
1 until you feel the latch open and
the button pushes out.
The unit switches on.
➮ To switch the unit off, press button
1 until you feel it click into place.
The unit switches off.
Switching on/off using the
vehicle ignition
If the device is correctly connected to
the vehicle’s ignition and the unit was
not switched off using button 1, it will
switch on/off simultaneously with the
ignition.
You can switch the unit on even if the
ignition is off.
➮ To do so, press button 1 so that
you feel it unlatch and push out.
Note:
To protect the vehicle battery, the unit
will switch off automatically after one
hour if the ignition is off.
SWITCHING ON/OFF