Filter
Top Products
44
CD MODE
Stopping SCAN and continuing
playback
➮ To stop scanning, press the OK
button ;.
The current track will then continue to
be played.
Repeating a track (REPEAT)
➮ If you want to repeat a track, press
button 4 RPT >.
“REPEAT TRCK” appears briefly in the
display and the RPT symbol lights up.
The track is repeated until you deacti-
vate RPT.
Stopping REPEAT
➮ If you want to stop the repeat func-
tion, press button 4 RPT > again.
“REPEAT OFF” appears briefly in the
display and the RPT symbol disappears.
Normal playback is then continued.
Pausing playback (PAUSE)
➮ Press button 3 >.
“PAUSE” appears in the display.
Cancelling pause
➮ Press button 3 > while in
pause mode.
Playback is continued.
Changing the display
➮ To switch between the track
number and clock display / track
number and playing time display /
track number and CD name dis-
play, press the
/ DIS button 7
once or several times for longer
than two seconds until the required
display appears.
Traffic announcements in CD
mode
➮ If you want to receive traffic an-
nouncements whilst listening to a
CD, press the TRAF button ?.
Traffic announcement priority is active
when the traffic symbol lights up in the
display. For further details, please read
the chapter entitled “Traffic information
reception”.
Naming CDs
The car radio allows you to assign
names for up to 30 CDs so that you can
recognise them more easily. The names
can be a maximum of eight characters
long. If you try assigning more than 30
names, “FULL” will appear in the display.
Entering / editing CD names
➮ Listen to the CD you wish to name.
➮ Press the MENU button 8.
➮ Press the or button : until
“CD NAME” appears.
➮ Press the
or
button : twice.
You will now enter editing mode. If your
CD does not have a name yet, eight
underscores will appear in the display.
➮ The currently active input position
flashes.
➮ Press the or button : to se-
lect the character you want. If you
want an empty space, simply select
the underscore.