Filter
Top Products
36
VOLUME ADJUSTMENT
If a traffic announcement is received
during a telephone call or whilst a nav-
igation announcement is being made,
the traffic announcement will only be
played after the call or voice output is
finished.
If you are already listening to a traffic
announcement and a telephone call
arrives or the navigation system wish-
es to make a voice output, the traffic
announcement will first be heard. Once
it is finished you can then listen to the
call or the voice output.
You can set the volume level at which
the telephone calls and navigation voice
output will first be heard.
➮ Press the MENU button 8.
➮ Keep pressing the button : un-
til “TEL/NAVI VOL” appears in the
display.
➮ Set the mute level using the and
buttons :.
➮ When you have finished making
your changes, press the MENU 8
or OK ; button.
Note:
You can directly adjust the volume of
telephone calls and navigation voice
output using the volume control 2.
Automatic sound
This feature automatically adjusts the
volume of the car radio to suit the speed
at which the vehicle is travelling. In or-
der for this to work, your car radio must
be connected in the manner described
in the installation instructions.
The automatic sound level can be ad-
justed in six steps from (0 to 5).
➮ Press the MENU button 8.
➮ Keep pressing the button : un-
til “AUTO SOUND” appears in the
display.
➮ Set the automatic sound level us-
ing the
and buttons :.
➮ When you have finished making
your changes, press the MENU 8
or OK ; button.
Note:
The optimum setting for the speed-re-
lated automatic sound adjustment fea-
ture depends on how noise develops in
your particular vehicle. You will have to
test various settings in order to discov-
er which is best suited to your vehicle.
Setting the volume of the
confirmation beep
For some functions, you will hear a con-
firmation beep if you keep a button
pressed for longer than two seconds,
e.g. after storing a radio station to a sta-
tion button you will hear a confirmation
beep. You can set the volume of this
beep.
➮ Press the MENU button 8.
➮ Keep pressing the button : un-
til “BEEP” appears in the display.
➮ Set the volume using the and
buttons :. “0” means beep off, “9”
means maximum beep volume.
➮ When you have finished making
your changes, press the MENU 8
or OK ; button.