Filter
Top Products
47
DANSK
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
Scanning receivable stations
(SCAN)
You can briefly listen in to all receivable
stations. The scanning time can be set
in the menu at between 5 and 30 sec-
onds.
Starting SCAN
➮ Hold down the OK button ; for
more than two seconds.
The scanning process begins. “SCAN”
appears briefly on the display, followed
by the current station name or frequen-
cy, which flashes.
Ending SCAN, continuing to listen
to a station
➮ Press the OK button ;.
The scanning process is completed, the
station last scanned remains active.
Setting the scanning time
➮ Press the MENU button 8.
➮ Press the button : repeatedly
until “SCANTIME” appears on the
display.
➮ Use the buttons : to set the
desired scanning time.
➮ Once the setting has been com-
pleted, press the MENU button 8
or OK ;.
Note:
The set scantime also applies to scan-
ning in CD mode but not to scanning in
CD changer mode.
Programm-Typ (PTY)
Besides transmitting the station name,
some FM stations also provide informa-
tion on the type of programme they are
currently broadcasting. This information
can be received and displayed by your
car radio.
For example, the programme types can
be:
CULTURE TRAVEL JAZZ
SPORT NEWS POP
ROCK CLASSICS
You can use the PTY function to select
stations of a particular programme type.
PTY-EON
Once the programme type has been
selected and the search started, the unit
switches from the current station to one
of the selected programme type.
Note:
● If no station corresponding to the
selected programme type is found,
a beep sounds and “NO PTY” ap-
pears briefly on the display. The
unit then tunes in automatically to
the station last received.
● If the set station or a different sta-
tion in the broadcasting network
should broadcast the desired pro-
gramme type at a later time, the
unit will automatically switch from
the current station, or from CD or
CD changer mode, to the station
broadcasting the desired pro-
gramme type.
RADIO MODE