Filter
Top Products
128-7092
16 of 28
-16-
Wired Headphones
There are two 1/8” headphone jacks on the VOD1021 that can be used with any standard wired stereo headphones.
These jacks are controlled by the volume up / down buttons on the VOD1021 and on the remote control.
Wired FM Modulator
The VOD1021 is equipped with an RF modulator, that allows you to listen to the VOD1021 audio signal by tuning your
vehicle’s radio to the selected frequency, (88.3, 88.7, 89.1, 89.5, 89.9, 90.3MHz). This feature is accessed by using
either the FM transmitter buttons on the remote (On/Off, Source Select, Channel Select) or the FM Select button on
the unit. Whenever the RF modulator is on, broadcast reception on the vehicles radio will be poor. Switching off the
FM modulator will allow normal radio reception.
AV1 Input
The video inputs may be connected to a Video cassette Player (VCP), video game system, or any other audio / video
device. To access the A/V inputs, turn the VOD1021 on and press the source button on the VOD1021 or the Source
button on the remote control until “AV1” is displayed on the screen. Turn the video source component on with its power
button or remote control. The VOD1021 is now ready to play the audio and video signals from the source connected
to the AV1 input.
AUX Input
Using the supplied A/V Adapter Cable (P/N 112B3227) the VOD1021 will accept an audio / video input through the 1/8”
jack located on the side of the unit. The audio / video device could be a video game system, video camera, or other
input device.
Video Out
The VOD1021 provides a video output for an optional video monitor(s). (Refer to page 6 of the Installation Guide for
more details.) This output will provide a video signal that duplicates the signal displayed by the VOD1021 to an additional
monitor or video display. Please see your installer for more information.