Filter
Top Products
12
DEFAULT: Use the arrow keys to position the highlight over DEFAULT
and press SELECT twice to restore factory defaults.
Clock Setup Page
Press the MENU button and use the LEFT or RIGHT ARROW keys
to highlight the “SETTINGS” icon. Press the SELECT button to bring
up the GENERAL SETUP PAGE. Then press the RIGHT ARROW key
to highlight the clock icon and press SELECT to enter the adjustment
mode.
Clock Mode: Clock mode allows the operator to select whether the
time will be displayed in 12 or 24 hour mode. To enter your selection
use the arrow keys to position the highlight over CLOCK MODE and
press the SELECT key. Follow by using the arrow keys to select the
desired setting and then press the SELECT key to exit and save your
choice.
Clock Setting: This option provides the operator with the means for
setting the time. Use the DOWN or UP ARROW keys to position the
highlight over CLOCK SETTING and press the SELECT key to enter
the current time. Use the Up/Down arrow keys to change the time and
use the Left/Right keys to select which parameter you will set. Once
the desired time is entered press SELECT key to save your choice.
Press the LEFT ARROW key to exit.
PDF created with pdfFactory Pro trial version www.pdffactory.com