Filter
Top Products
9
2. Remote Control View (Refer to Figure 4)
1) Setup Button
2) Up Button
3) Previous Button
4) Enter Button
5) Left/Reverse Button
6) Down Button
7) Numeric Buttons
8) Display Button
9) Zoom Button
10) Subtitle Button
11) Next Button
12) A-B Repeat Button
13) Right/Forward Button
14) 1/ALL Repeat Button
15) Stop Button
16) Menu Button
17) Audio Button
18) Angle Button
19) Play/Pause Button
G. Loading and Playing a Disc
a.After connecting power to the unit, turn the DVD player on with the
power switch. The power indicator will light.
b.Open the disc tray by sliding the OPEN switch in the direction of
the arrow and place a disc into the tray with the label side facing
up.
c.Close the tray by pressing the area marked “PRESS” on the disc
door. The unit will read the disc and start playing.
d.Rotate the BRIGHTNESS and VOLUME controls to adjust the
brightness and the volume to the desired levels.
e.To stop playing a disc, press STOP.
f.To turn off the DVD player, slide the POWER ON/OFF to OFF.
The DVD player’s POWER indicator will turn off.
Figure 4